The Benefits of 3M Carbon Fiber

For anyone who has considered installing 3M carbon fiber vinyl to their vehicle or using it for other projects, knowing the benefits of this material can help them to simplify the decision process. One of the benefits that many people consider first is the fact that it is much more cost effective than real carbon fiber while still maintaining the good look of it. The following are some other benefits to using 3M carbon fiber vinyl:

• Looks Real – This carbon fiber vinyl looks just like the real carbon fiber but is much more cost effective. It only costs pennies on the dollar when compared to the real carbon fiber. When you want a realistic carbon fiber look, nothing comes close to the 3M carbon fiber vinyl with the exception of the real thing. For most people, this is the main reason to purchase this material over others on the market.
• Does Not Lift Off Easily – Once you have properly applied the 3M carbon fiber vinyl, it does not lift off easily from the surface it is applied to. Remember that you must use the proper installation techniques in order for the vinyl to keep from lifting. Keep in mind that removal can be accomplished when the right techniques are employed so do not consider the adhesion properties as a liability. With the grooved adhesive pattern, air bubbles are no longer an issue and this is important because the air bubbles are one of the main sources of vinyl lifting.
• Little Preparation Required – There is not much preparation that is required before installing the vinyl on any type of material. You really only need the area to be clean and free from dust and dirt. Using denatured alcohol can help to prepare the area and to ensure a good bond with the adhesive and the installation area. If it is not possible to use denatured alcohol, rubbing alcohol or soap and water can be used to clean the application area. When using soap and water, make sure to rinse and dry it completely before installing the vinyl.
• Easy to Work With – If you use the proper installation techniques such as warming the area where the vinyl is to be installed and cutting the vinyl to fit before installation, this product is very easy to work with. The pattern is considered a continuous one so it matches up easily when a large area is being covered and overlapping is required. It has some flexibility to it and that makes it go around curves, edges and contours without creasing or wrinkling.

When considering the purchase of 3M carbon fiber, the above illustrates the reasons why this vinyl is the one that most professionals use for their projects. It is cost effective and still looks just like the real thing. It is easy to install and work with and the adhesive has grooves that mean the likelihood of air bubbles is slim. You do not have to do much to prepare the installation area for the vinyl either and this is a huge factor for many.